Power & Canister Filter Replacement Parts

Cascade 1000 Canister Filter Motor Unit replacement part. Penn Plax Cascade 1000 Canister filter Motor Unit DOES match their manufacturer sku of CCF214.

• Replacement Cascade 1000 Canister Filter Motor Unit
• Cascade 1000 Replacement Motor only
• Does not include impeller - sold separately

NOTE: The impeller, and impeller housing are NOT INCLUDED! Make sure you put the impeller and impeller housing into the new motor when it arrives so that the motor can pump water into the filter. Or you may purchase them seperately.

The Marineland Micron Filter for Penguin Rite-Size C fits in the Penguin Pro 275 & 375 and works to filter out both large and fine debris while improving your mechanical filtration. For use in freshwater or saltwater this micron polishing filter cartridge is best left overnight, leaving you with cleaner healthier water by morning.

• For overnight use
• Can be used in freshwater or saltwater aquariums
• Micron filter for better screening
• Fits the Penguin Pro 275 & 375 filter

The Marineland Micron Filter for Emperor Rite-Size E fits in the Emperor Pro 450 and works to filter out both large and fine debris while improving your mechanical filtration. For use in freshwater or saltwater, this micron polishing filter cartridge is best left overnight, leaving you with cleaner healthier water by morning.

• For overnight use
• Can be used in freshwater or saltwater aquariums
• Micron filter for better screening
• Fits the Emperor Pro 450 filter

Marinelands C-Series Replacement Tubing is made of tough, resilient vinyl that provides both strength and flexibility. It is a replacement part for Marineland C-Series (C-160 & C-220) Canister Filters.

• Made of strong vinyl tubing
• 5/8" ID x 6' Long
• Replacement tubing for C-160 & C-220 filters

The Marineland C-Series C-360 Inlet and Outlet Tube Set features replacement parts for the Marineland 360 C-Series Canister Filters. Inlcudes inlet tube, outlet tube, and inlet tube strainer.

• Replacement inlet and outlet tubes
• Fits Marineland 360 C-Series Canister Filters
• Includes inlet tube, outlet tube and inlet strainer

Marineland C-Series C-160 and C-220 Suction Cups are used to firmly attach the filters intake and outlet tubes to your aquarium walls.

• Replacement suction cups for Marineland C-Series C-160 and C-220 External Canister Filters
• Used to anchor intake and outlet tubes to aquarium walls
• Simple clip-on attachment

Moisten suction cups when applying. Suction cups should be used to attach the intake tube to the inner wall of the aquarium, and the outlet tube to the outer.

Marinelands C-Series O-Ring and Gasket kit contains all the replacement seals for the C-Series C-160 and C-220 Aquarium Canister Filters. Sound O-rings and gaskets are essential for maintaining proper seals and protecting your filter.

• Replacement O-ring and gasket kit for Marineland C-160 and C-220
• Contains all O-rings and gaskets
• Replace old parts to maintain proper seals and protect filter

Marinelands C-Series O-Ring and Gasket kit contains all the replacement seals for the C-Series C-160 and C-220 Aquarium Canister Filters. Sound O-rings and gaskets are essential for maintaining proper seals and protecting your filter.

• Replacement O-ring and gasket kit for Marineland C-160 and C-220
• Contains all O-rings and gaskets
• Replace old parts to maintain proper seals and protect filter

This Marineland Impeller Assembly is a genuine factory replacement part for the Emperor 400 Power Filter. Pack includes the complete impeller assembly and cover.

• Replacement impeller for Emperor 400
• Includes impeller assembly and cover
• Genuine Marineland replacement part

This Marineland Replacement Bio-Wheel is for the Eclipse 2, Emperor 280B and 400B Filters. As the Bio-Wheel rotates, beneficial bacteria grow and thrive on its super dense surface. As water flows, the bacteria eliminate ammonia and nitrite on contact.

• Irregular rotation of the Bio-Wheel is also normal
• Discoloration of pleated Bio-Wheel material is normal and desirable
• A Bio-Wheel rotating at any speed is working to eliminate toxic ammonia and nitrite

Note: Marineland Bio-Wheel should not be replaced unless damaged.

The Cascade 1000 Impeller replaces the impeller for the Cascade 1000 canister filter. Replacing an old impeller is essential to keep your filter running powerfully and efficiently.

• Magnetic impeller assembly replacement
• Fits Cascade 1000 canister filter
• Includes impeller, shaft and magnet

Old impellers can result in decreased water flow, poor circulation, and, in some cases, even an unpleasant grinding noise. Replace the impeller to reinvigorate your filter with strong, silent water pull and maximum circulation.

Note: For the Cascade 1000 canister filter only. Cascade 1200 and 1500 models each require different impellers.

Marinelands Penguin 150B Impeller Housing is a replacement part for the 150B Power Filter. This part keeps the impeller and the "J" shaped black intake tube connected in line which allows the filters suction to function properly.

• Replacement part for the 150B Power Filter
• Keeps the impeller and the "J" shaped black intake tube connected in line
• Allows the filters suction to function properly

Ensure to check the rubber bushing on the ends of your impeller to make sure there is not too much wear and tear (damaged bushings can cause the filter to function improperly)

Cascade 700 and 1000 Motor Unit Gasket replaces old, worn out or cracked motor gaskets in the Cascade 700 (CCF2UL) and 1000 (CCF3UL) aquarium canister filters.

• Cascade canister filter motor unit gasket replacement
• Fits Cascade 700 (CCF2UL) and 1000 (CCF3UL) canister filters
• Prevents costly damage to filter motor

This gasket only works for the Cascade 700 and 1000 model filters. Other models will require different gaskets.

Replacement Impeller O-ring for Penn Plax Cascade Canister Filters. This O-ring maintains a quality seal and protects the impeller from leaks and water damage. Fits Cascade models 700 and 1000.

• Replacement Impeller O-ring for Penn Plax Canister Filters
• Fits models Cascade 700 and Cascade 1000
• Maintains an effective seal to prevent damage to impeller

Cascade 1500 Canister Filter Motor Unit replacement part. Penn Plax Cascade 1500 Canister filter Motor Unit DOES match their manufacturer sku of CCF314.

• Replacement Cascade 1500 Canister Filter Motor Unit
• Cascade 1500 Replacement Motor Only
• Does Not Include Impeller - Sold Separately

NOTE: The impeller, and impeller housing are NOT INCLUDED! Make sure you put the impeller and impeller housing into the new motor when it arrives so that the motor can pump water into the filter. Or you may purchase them seperately.

The Cascade 1200 Impeller replaces the impeller for the Cascade 1200 canister filter. Replacing an old impeller is essential to keep your filter running powerfully and efficiently.

• Magnetic impeller assembly replacement
• Fits Cascade 1200 canister filter
• Includes impeller, shaft and magnet

Old impellers can result in decreased water flow, poor circulation, and, in some cases, even an unpleasant grinding noise. Replace the impeller to reinvigorate your filter with strong, silent water pull and maximum circulation.

Note: For the Cascade 1200 canister filter only. Cascade 1000 and 1500 models each require different impellers.

The Cascade 1500 Impeller replaces the impeller for the Cascade 1500 canister filter. Replacing an old impeller is essential to keep your filter running powerfully and efficiently.

• Magnetic impeller assembly replacement
• Fits Cascade 1500 canister filter
• Includes impeller, shaft and magnet

Old impellers can result in decreased water flow, poor circulation, and, in some cases, even an unpleasant grinding noise. Replace the impeller to reinvigorate your filter with strong, silent water pull and maximum circulation.

Note: For the Cascade 1500 canister filter only. Cascade 1000 and 1200 models each require different impellers.

The Cascade 1200 and 1500 Motor Unit Gasket replaces old, worn out or cracked motor gaskets in the Cascade 1200 (CCF4UL) and 1500 (CCF5UL) aquarium canister filters.

• Cascade canister filter motor unit gasket replacement
• Fits Cascade 1200 (CCF4UL) and 1500 (CCF5UL) canister filters
• Prevents costly damage to filter motor

As gaskets get older, pressure and wear-and-tear cause them to lose their snugness. Replace misshapen gaskets to maintain a water-tight fit.

This gasket only works for the Cascade 1200 and 1500 model filters. Other models will require different gaskets.

Replacement Impeller for the Lifegard Aquatics Quiet One Pro Model Pump

• The Ceramic Shaft is NOT included.
• This Impeller is the replacement for both the pond & aquarium Quiet One Pro Model Pumps
• This part is for the Quiet One Pro Series Pumps only. It will NOT work with any of the Quiet One Original Series Pumps

Replacement Impeller for the Lifegard Aquatics Quiet One Pro

• Will not work with any of the the Quiet One Original Series Pumps.

Replacement impeller for Lifegard Aquatics Quiet One Pro

Old impellers can result in decreased water flow, poor circulation, and, in some cases, even an unpleasant grinding noise. Replace the impeller to reinvigorate your filter with strong, silent water pull and maximum circulation.

Replacement Impeller For Lifegard Aquatics Quiet One Pro. Old impellers can result in decreased water flow, poor circulation, and, in some cases, even an unpleasant grinding noise. Replace the impeller to reinvigorate your filter with strong, silent water pull and maximum circulation.

• Replacement Impeller for Quite One Pro 1400 Water Pump
• Durable Impeller with Magnetic Shaft
• Replace Impeller if Fan Blades are Damaged or Water Flow is Diminished

The Tetra Whisper Impeller Assembly replaces the impeller for the Whisper Power Filter PF60, 3, 4, Whisper Advanced PF30-60 and Triad 3000 filters. Replacing an old impeller is essential to keep your filter running powerfully and efficiently.

• Magnetic impeller assembly replacement
• Fits Whisper PF60, 3, 4, Whisper Advanced PF30-60 and Triad 3000 power filters
• Full impeller assembly

Old impellers can result in decreased water flow, poor circulation, and, in some cases, even an unpleasant grinding noise. Replace the impeller to reinvigorate your filter with strong, silent water pull and maximum circulation.

Rena Filstar XP Canister Clips are used to anchor the canister lid to the rest of the filter canister. These clips are a universal fit for all API Filstar XP and Rena Filstar XP Canister Filter models.

• Replacement clips for canister filter lid
• Universal fit for API Filstar XP and Rena Filstar XP canister filters
• Pack of 2

These clips fit the following Filstar XP models:

• Filstar XP1
• Filstar XP2
• Filstar XP3
• Filstar XP4

The API Filstar XP Extension Tube and Strainer Kit (formerly Rena Filstar) includes 2 inlet pipe extensions and 1 inlet strainer for easy customization of your XP aquarium filter to fit deeper aquariums. Fits all API Filstar XP and Rena Filstar XP models.

• Extend and customize inlet tubing on XP canister filters for deeper aquariums
• 1 Count includes two 3" inlet pipe extension tubes and 1 inlet strainer
• Fits all API Filstar XP and Rena Filstar XP models

The Aquatop Replacement Barrelhead O-Ring for CF400-UV provides a tight fit and a secure seal for your Aquatop CF400-UV Canister Filter. Maintain a complete seal is essential for efficient operation and leak prevention.

• Replacement O-ring for Aquatop CF400-UV Canister Filter
• Maintains seal and prevents leaks
• Genuine Aquatop replacement part

This Aquatop Replacement Impeller Assembly fits CF500-UV Canister Filters. The replacement assembly comes complete with impeller shaft, rubber grommets, fan blade, and magnet.

• Replacement impeller for Aquatop CF500-UV Canister Filter
• Includes shaft, rubber grommets, fan blade and magnet
• Genuine Aquatop replacement part

These Aquatop Replacement Media Trays fit CF400-UV Canister Filters. Each pack contains all three trays for complete filtration. Note that media trays do not include filter pads or media.

• Replacement media trays for Aquatop CF400-UV Canister Filter
• Filter pads and media sold separately
• Genuine Aquatop replacement part

Tray Dimensions: 8"L x 8"W x 2-7/8"H